Configuring The Flexible Netstream Feature; Establishing The Configuration Task; Creating A Record And Entering The Record View - Huawei S9700 Series Configuration Manual

S9700 Core Routing Switch
Configuration Guide - SPU

5.7 Configuring the Flexible NetStream Feature

This section describes how to configure the Flexible NetStream feature to flexibly create
NetStream statistics according to records.

5.7.1 Establishing the Configuration Task

Applicable Environment
To collect traffic statistics based on the protocol type, DSCP field, source IP address, destination
IP address, source port number, destination port number, or traffic label on the network,
configure Flexible NetStream.
Pre-configuration Tasks
Before configuring Flexible NetStream, complete the following task:
l
l
l
Data Preparation
To configure the Flexible NetStream, you need the following data.
No.
1
2

5.7.2 Creating a Record and Entering the Record View

Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
ip netstream record record-name
A record is created and the record view is displayed.
----End
Issue 01 (2012-03-15)
Setting physical parameters on interfaces
Setting the link-layer parameters of the interface
Configuring port mirroring on the Switch to import the flows to the SPU
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 NetStream Configuration
Data
Name and number of the interface on which
traffic statistics need to be collected
IP address and port number of the NSC
164