Entering Pim View; Configuring Multicast Source (Group) Filtering Policy; Configuring Filtering Pim Neighbors - Huawei Quidway S6500 Series Operation Manual

Operation Manual - Multicast Protocol
Quidway S6500 Series Ethernet Switches
You should first start PIM (PIM-DM or PIM-SM) protocol in interface view before
initiating this configuration.

6.2.4 Entering PIM View

To configure PIM-related global parameters, you need to enter PIM view.
Please perform the following configurations in system view.
Table 6-3 Entering PIM view
Enter PIM view
Clear configurations in PIM view and
return to system view

6.2.5 Configuring Multicast Source (Group) Filtering Policy

Received multicast data packets or register packets can be filtered by the contained
source/group addresses to enhance the network security.
Please perform the following configurations in PIM view.
Table 6-4 Configuring multicast source (group) filtering policy
Set source (group) filtering for received
multicast packets`
Remove filtering conifiguraiton
If the basic access control list is configured, all the multicast data packets received will
have their source addresses matched. The packets with source addresses beyond
those in the list will be discarded.
If the advanced access control list is configured, all the multicast data packets received
will have their source and group addresses matched. The packets with source
addresses and/or group addresses beyond those in the list will be discarded.

6.2.6 Configuring Filtering PIM Neighbors

You can filter among routers for PIM neighbors of the current interface by configuring
Access control list.
Please perform the following configurations in interface view.
Operation
Operation
Huawei Technologies Proprietary
6-6
Chapter 6 PIM Configuration
Command
pim
undo pim
Command
source-policy acl-number
undo source-policy