Maintaining Aaa And User Management; Clearing The Statistics; Debugging - Huawei Quidway S9300 Configuration Manual

1 AAA and User Management Configuration
Domain-state
Authentication-scheme-name
Accounting-scheme-name
Authorization-scheme-name
Web-IP-address
Primary-DNS-IP-address
Second-DNS-IP-address
Primary-NBNS-IP-address
Second-NBNS-IP-address
Idle-data-attribute (time,flow) : 60, 1500
User-access-limit
Online-number
RADIUS-server-template
HWTACACS-server-template
-------------------------------------------------------------------

1.8 Maintaining AAA and User Management

This section describes how to maintain AAA and user management.

1.8.1 Clearing the Statistics

1.8.2 Debugging

1.8.1 Clearing the Statistics
Context
Statistics cannot be restored after you clear them. So, confirm the action before you use the
command.
Run the following command in the user view to clear the statistics.
Procedure
l
----End
1.8.2 Debugging
Context
Debugging affects the performance of the system. So, after debugging, run the undo debugging
all command to disable it immediately.
1-32
CAUTION
Run the reset hwtacacs-server statistics { all | accounting | authentication |
authorization } command to clear the statistics on the HWTACACS server.
CAUTION
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
: Active
: scheme1
: default
: scheme1
: -
: -
: -
: -
: -
: 300
: 0
: rrr
: hhh
Configuration Guide - Security
Issue 01 (2009-07-28)