Maintaining Layer 2 Multicast; Clearing Static Entries In A Multicast Forwarding Table - Huawei Quidway S2700 Series Configuration Manual

Quidway S2700 Series Ethernet Switches
Configuration Guide - Multicast
Flag: S:Static
-----------------------------------------------------------------------
VLAN 10, 3 Entry(s)
-----------------------------------------------------------------------

1.6 Maintaining Layer 2 Multicast

Maintaining Layer 2 multicast involves resetting Layer 2 Multicast statistics, and debugging
IGMP Snooping.

1.6.1 Clearing Static Entries in a Multicast Forwarding Table

Context
Static entries in a forwarding table cannot be restored after you clear them and you have to
configure them again. Confirm the operation before you run the following command.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
interface interface-type interface-number
The interface view is displayed.
The interface can be an Ethernet interface, a GE interface, or an Eth-Trunk interface.
Step 3 Run:
undo l2-multicast static-group [ source-address source-ip-address ] group-address
group-ip-address vlan { all | { vlan-id1 [ to vlan-id2 ] } & <1-10> }
The interface is removed from a multicast group.
Or run:
undo l2-multicast static-group [ source-address source-ip-address ] group-address
group-ip-address1 to group-ip-address2 vlan vlan-id
The interface is removed from multiple multicast groups in a batch.
----End
Issue 01 (2011-07-15)
D:Dynamic
(*, 225.1.1.1)
(*, 225.1.1.2)
(*, 225.1.1.3)
CAUTION
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
M: Ssm-mapping
GE0/0/2
1 port(s)
GE0/0/2
1 port(s)
GE0/0/2
1 port(s)
1 IGMP Snooping Configuration
--M
--M
--M
21