Sending Information To The Log Host; Checking The Configuration; Maintaining The Information Center - Huawei Quidway S3700 Series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Device Management
Step 2 Run:
info-center trapbuffer [ channel { channel-number | channel-name } | size
buffersize ]
Information is sent to the trap buffer.
----End

6.3.6 Sending Information to the Log Host

Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
info-center loghost ip-address [ channel { channel-number | channel-name } |
facility local-number | { language language-name | binary [ port ] } | { vpn-
instance vpn-instance-name | public-net } ]
Information is sent to the IPv4 log host.
Step 3 Run:
info-center loghost ipv6 ipv6-address [ channel { channel-number | channel-name }
| facility local-number | { language language-name | binary [ port ] } ]
Information is sent to the IPv6 log host.
Step 4 Run:
info-center loghost source interface-type interface-number
The source interface for sending logs is specified.
----End

6.3.7 Checking the Configuration

Run the following commands to check the previous configuration.
Action
Check statistics in the
information center.
Run the preceding command. If the information center can send the statistics to the destination
terminal, it means that the configuration succeeds.

6.4 Maintaining the Information Center

This section describes how to clear the statistics.
Issue 01 (2011-07-15)
*
Command
display info-center [ statistics ]
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Monitoring the Device Through the Information Center
*
*
60