Table of Contents
Advertisement
Stacking Tray (Auto-control Stacking Tray / Wide Stacking Tray)
The auto-control stacking tray and wide
stacking tray are available as optional stacking
trays.
•
With the auto-control stacking tray, the paper
guides adjust automatically to fit the paper
size.
•
With the wide stacking tray, move the paper
guides (side and end) to match the paper size.
<The auto-control stacking tray is shown in the
illustration below.>
A
Paper Arrangers
Set to suit the paper type so that the output paper is
neatly aligned.
B
Paper Guide (side)
C
Paper Guide (end)
Use to prevent output paper in the stacking tray from
becoming misaligned.
D
Paper Guides Open Button (Auto-control
stacking tray only)
Use to spread the paper guides apart. Operation
varies depending on whether paper is present or not.
•
When the machine is idle and there is no paper in
the stacking tray, the guides open to the loading
position.
•
When the machine is idle and there is paper in the
stacking tray, the paper guides spread apart,
making it easy to remove the paper.
The administrator can configure which paper
guides spread apart when the button is pressed.
Stacking Tray (Auto-control Stacking Tray / Wide Stacking Tray)
ComColor GL Series User's Guide
8
191
Advertisement
Table of Contents
