Load; Offset Load - Keysight 11644A R Manual

User Information
Measurement Applications

Load

Connect the termination to the appropriate test port, as shown in
Figure 3-3 Test Port and Termination

Offset Load

Connect the shim and the termination to the appropriate test port, as shown in
Figure 3-4
For offset load calibration with the R11644A WR-28, Q11644A WR-22, and
U11644A WR-19, the moving load must be in a locked position. For more
information refer to your network analyzer user's guide.
Figure 3-4 Connect the Shim and the Termination to the Test Port
3-4 Keysight R, Q, U, V, and W11644A
Figure 3-3.