Dell S6000 Reference Manual page 418

Command line for the system
Hide thumbs Also See for S6000:
Table of Contents

Advertisement

The Lines
Beginning with:
Prefix advertised
Connections
established
Last reset
Local host:
Foreign host:
Example
Dell#show ip bgp neighbors 172.16.0.2
BGP neighbor is 172.16.0.2, remote AS 200, external link
418
Description
Displays the number of network prefixes advertised, the
number rejected, and the number withdrawn from the BGP
routing table.
Displays the number of TCP connections established and
dropped between the two peers to exchange BGP
information.
Displays the amount of time since the peering session was
last reset. Also states if the peer resets the peering session. If
the peering session was never reset, the word never is
displayed.
Displays the peering address of the local router and the TCP
port number.
Displays the peering address of the neighbor and the TCP
port number.
Member of peer-group port0 for session parameters
BGP remote router ID 172.16.0.2
BGP state ESTABLISHED, in this state for 00:13:55
Last read 00:00:03, Last write 00:00:55
Hold time is 180, keepalive interval is 60 seconds
Received 50 messages, 0 in queue
1 opens, 0 notifications, 34 updates
15 keepalives, 0 route refresh requests
Sent 18 messages, 0 in queue
1 opens, 0 notifications, 0 updates
16 keepalives, 0 route refresh requests
Route refresh request: received 0, sent messages 1
Minimum time between advertisement runs is 30 seconds
Minimum time before advertisements start is 0 seconds
Capabilities received from neighbor for IPv4 Unicast :
MULTIPROTO_EXT(1)
ROUTE_REFRESH(2)
Capabilities advertised to neighbor for IPv4 Unicast :
MULTIPROTO_EXT(1)
ROUTE_REFRESH(2)
ADD_PATH(69)
CISCO_ROUTE_REFRESH(128)
For address family: IPv4 Unicast
BGP local RIB : Routes to be Added 0, Replaced 0, Withdrawn 0
InQ : Added 0, Replaced 0, Withdrawn 0
OutQ : Added 0, Withdrawn 0
Allow local AS number 0 times in AS-PATH attribute
Border Gateway Protocol

Advertisement

Table of Contents
loading

Table of Contents