Description - Dell S6000 Reference Manual

Version 7.8.1.0
Version 7.7.1.0
Usage
The default-metric command in BGP sets the value of the BGP
Information
MULTI_EXIT_DISC (MED) attribute for redistributed routes only.
Related
bgp always-compare-med
Commands
redistribute

description

Enter a description of the BGP routing protocol
S6000
Syntax
description {description}
To remove the description, use the no description {description}
command.
Parameters
description
Defaults none
Command ROUTER BGP
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.7.1.0
pre-7.7.1.0
Related
router bgp
Commands
Border Gateway Protocol
Introduced on the S-Series.
Introduced on the C-Series.
— enables comparison of all BGP MED attributes.
— redistributes routes from other routing protocols into BGP.
Enter a description to identify the BGP protocol (80
characters maximum).
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced.
— enters ROUTER mode on the switch.
359