Dell S6000 Reference Manual page 416

denied-routes
[network
[network-mask]
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.4.
(0.0)
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.8.0
Version 8.3.7.0
Version 7.8.1.0
Version 7.7.1.0
Version 7.5.1.0
Version 7.2.1.0
Version 6.3.10
Usage
After a peer reset, the contents of the notification log messages is displayed in hex
Information
values for debugging.
The neighbor information that this command displays does not include counts
corresponding to ignored prefixes and updates. However, the martian case is an
exception where neighbor information corresponding to ignored updates is
displayed.
BGP shows the exact information that is exchanged between the BGP peers. It also
indicates whether or not this information is received by the BGP peer.
The following describes the show ip bgp neighbors command shown in the
following examples.
416
(OPTIONAL) Enter the keywords denied-routes then
either the network address (in dotted decimal format) or the
network mask (in slash prefix format) to view all information
on routes denied via neighbor inbound filters.
EXEC
EXEC Privilege
Added support for VRF.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Added the add-path option to the S4810. Output on the
S4810 shows the ADDPATH parameters.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Added the detail option. Output now displays the default
MED value.
Added the received and denied route options.
The output is changed to display the total number of
advertised prefixes.
Border Gateway Protocol