Show Ip Protocol-Queue-Mapping - Dell S6000 Reference Manual

Version 8.3.8.0
Usage
This command applies the service-policy based on the type of protocol defined in
Information
the ACL rules.
Create ACL and QoS policies prior to enabling this command.
Example
Dell#show cpu-queue rate cp for 8 queue platform
Service-Queue Rate (PPS)
-------------- -----------
Q0
Q1
Q2
Q3
Q4
Q5
Q6
Q7
Dell#

show ip protocol-queue-mapping

Display the queue mapping for each configured protocol.
S6000
Syntax
show ip protocol-queue-mapping
Defaults Not configured.
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.8.0
Example
Dell#show ip protocol-queue-mapping
Protocol
Rate(kbps)
----
-----------
TCP (BGP)
Control Plane Policing (CoPP)
Introduced on the S4810.
1300
300
300
300
2000
400
400
1100
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Src-Port Dst-Port
-------- --------
any/179
TcpFlag
------- ----- ------
179/any _
Queue EgPort
Q6 CP
447