Max-Paths - Dell S6000 Reference Manual

max-paths

Configure the maximum number of parallel routes (multipath support) BGP supports.
S6000
Syntax
max-paths {ebgp | ibgp} number
To return to the default values, enter the no maximum-paths command.
Parameters
ebgp
ibgp
number
Defaults none
Command ROUTER BGP
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.8.0
Version 8.3.7.0
Version 7.8.1.0
Version 7.7.1.0
Usage If you enable this command, use the clear ip bgp * command to recompute
Information
the best path.
360
Enter the keyword ebgp to enable multipath support for
External BGP routes.
Enter the keyword ibgp to enable multipath support for
Internal BGP routes.
Enter a number as the maximum number of parallel paths.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Support from 2 to 64 paths on the S4810. Command syntax
changed to max-path (was maximum-paths).
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Border Gateway Protocol