Show Cpu-Queue Rate Cp - Dell S6000 Reference Manual

Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.8.0
Usage
This command applies the service-policy based on the type of protocol defined in
Information
the ACL rules.
Create ACL and QoS policies prior to enabling this command.
For CoPP, use the keyword cpu-qos when creating qos-policy-input.
Related
ip access-list extended
Commands
mac access-list extended
qos-policy-input
class-map
policy-map-input

show cpu-queue rate cp

Display the rates for each CPU queue.
S6000
Syntax
show cpu-queue rate cp
Defaults Not configured.
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
446
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
— creates an extended IP ACL.
— creates an extended MAC ACL.
— creates a QoS input policy map.
— creates a QoS class map.
— creates an input policy map.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Control Plane Policing (CoPP)