Bgp Always-Compare-Med - Dell S6000 Reference Manual

Version
8.3.19.0
Version 8.3.11.0
Version 8.3.8.0
Related neighbor add-path
Commands multiple path advertisements.

bgp always-compare-med

Allows you to enable comparison of the MULTI_EXIT_DISC (MED) attributes in the paths from different
external ASs.
S6000
Syntax
bgp always-compare-med
To disable comparison of MED, enter no bgp always-compare-med.
Defaults Disabled (that is, the software only compares MEDs from neighbors within the
same AS).
Command ROUTER BGP
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 8.2.1.0
Version 7.7.1.0
Usage
Any update without a MED attribute is the least preferred route.
Information
If you enable this command, use the clear ip bgp * command to recompute
the best path.
326
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
— specifies that this neighbor/peer group can send/receive
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced command.
Introduced on the C-Series.
Border Gateway Protocol