Usage
This command reverses changes made with the boot change command.
Information
BOOT_USER # boot zero primary
BOOT_USER # boot zero secondary
BOOT_USER # boot zero default
BOOT_USER # show bootvar
PRIMARY OPERATING SYSTEM BOOT PARAMETERS:
========================================
No Operating System boot parameters specified!
SECONDARY OPERATING SYSTEM BOOT PARAMETERS:
==========================================
No Operating System boot parameters specified!
DEFAULT OPERATING SYSTEM BOOT PARAMETERS:
========================================
No Operating System boot parameters specified!
BOOT_USER #
Related
boot_change— Change the primary, secondary, or default boot image
Commands
configuration.
default-gateway
Assign an IP address as the default gateway for the system.
S6000
Syntax
[no] default-gateway ip-address
Parameters
ip-address
Command
BOOT_USER
Modes
Boot Command Line Interface
Enter the IP address of the gateway router in dotted decimal
format (A.B.C.D).
313