Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 1211

IPv6 Commands
Examples
-> show ipv6 router database
Legend: + indicates routes in use
Total IPRM IPv6 routes: 5
Destination/Prefix
-------------------+-------------------------+-----------------+---------+-------
195:35::/64
212:95:5::/64
Inactive Static Routes:
VLAN Destination/Prefix
-----+-------------------+-------------------------+-------
1510 212:95:5::/64
output definitions
Destination/Prefix
Gateway Address
Interface
Protocol
Metric
VLAN
Release History
Release 6.6.1; command was introduced.
Related Commands
show ipv6 routes
OmniSwitch 6250 CLI Reference Guide
Gateway Address
fe80::2d0:95ff:fe12:f470
fe80::2d0:95ff:fe12:f470
Gateway Address
fe80::2d0:95ff:fe6a:f458
IPv6 destination address and prefix.
IPv6 address of the gateway used to reach the destination network.
The IPv6 interface name or loopback.
Protocol by which this IPv6 address was learned (LOCAL, STATIC,
RIP).
RIP metric or cost (hop count) for the route. Indicates a priority for the
route. The lower the metric value, the higher the priority.
The VLAN on which the route was learned, not forwarded. Note that
N/A appears in this field for static routes as they are not learned on a
VLAN.
Displays the IPv6 Forwarding Table.
November 2009
Interface Protocol
v6if-to-eagle RIP
smbif-5 Local
Metric
1
Metric
2
1
page 30-45