Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 1196

Administrative status
Operational status
Hardware address
Link-local address(es):
fe80::2d0:95ff:fe12:f470/64
Global unicast address(es):
212:95:5::35/64
Anycast address(es):
212:95:5::/64
Joined group addresses:
ff02::1:ff00:0
ff02::2:93da:68lb
ff02::1
ff02::1:ff00:35
Maximum Transfer Unit (MTU)
Neighbor reachable time (sec) = 538
Base reachable time (sec)
Retransmit timer (ms)
DAD transmits
Send Router Advertisements
Maximum RA interval (sec)
Minimum RA interval (sec)
RA managed config flag
RA other config flag
RA reachable time (ms)
RA retransmit timer (ms)
RA default lifetime (sec)
RA hop limit
RA send MTU option
RA clock skew (sec)
Packets received
Packets sent
Bytes received
Bytes sent
Input errors
Output errors
Collisions
Dropped
output definitions
IPv6 interface index
Administrative status
Operational status
Hardware address
Link-local address
Global unicast address(es)
Joined group address(es)
Maximum Transfer Unit
Send Router Advertisements
Maximum RA interval (sec)
page 30-30
= Enabled
= Active
= 00:E0:B1:C2:EE:87
= 1500
= 360
= 1000
= 1
= No
= 600
= 198
= False
= False
= 30000
= 1000
= 1800
= 64
= No
= 600
= 215686
= 2019
= 14108208
= 178746
= 0
= 0
= 0
= 0
IPv6IfIndex value that should be used in SNMP requests pertaining to
this interface.
Administrative status of this interface (Enabled/Disabled).
Indicates whether the physical interface is connected to a device
(Active/Inactive).
Interface's MAC address.
Link-local address assigned to the interface.
Global unicast address(es) assigned to the interface.
Addresses of the multicast groups that this interface has joined.
Interface MTU value.
Indicates if the router sends periodic router advertisements and
responds to router solicitations on the interface.
Maximum time between the transmission of unsolicited router adver-
tisements over the interface.
OmniSwitch 6250 CLI Reference Guide
IPv6 Commands
November 2009