Show Ipv6 Tcp Ports - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

show ipv6 tcp ports

Displays TCP Over IPv6 Connection Table. This table contains information about existing TCP connec-
tions between IPv6 endpoints.
show ipv6 tcp ports
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
Only connections between IPv6 addresses are contained in this table.
Examples
-> show ipv6 tcp ports
Local Address
--------------------+-------------------------------------+------+--------------+--------
::
::
2002:d423:2323::35
2002:d423:2323::35
output definitions
Local Address
Port
Remote Address
Port
Interface
State
Release History
Release 6.6.1; command was introduced.
page 30-46
Port Remote Address
21 ::
23 ::
21 212:61:61:0:2b0:doff:fe43:d4f8
49153 212:61:61:0:2b0:d0ff:fe43:d4f8
Local address for this TCP connection. For ports in the "Listen" state,
which accepts connections on any IPv6 interface, the address is ::0.
Local port number for the TCP connection.
Remote IPv6 address for the connection. If the connection is in the
"Listen" state, the address is ::0.
Remote port number for the TCP connection. If the connection is in the
"Listen" state, the port number is 0.
Name of the interface (or "unknown") over which the connection is
established.
State of the TCP connection as defined in RFC 793.
Port Interface
0
0
34144 v6if-6to4-137
34144 v6if-6to4-137
OmniSwitch 6250 CLI Reference Guide
IPv6 Commands
State
listen
listen
established
established
November 2009