Table 20: Show Filter Counters - Alcatel-Lucent 7210 SAS T Configuration Manual

Sample Output
*A:7210SAS>show>filter# ipv6 1 associations
===============================================================================
IPv6 Filter
===============================================================================
Filter Id
Scope
Entries
Description
-------------------------------------------------------------------------------
Filter Association : IPv6
-------------------------------------------------------------------------------
Service Id
Service Id
===============================================================================
*A:7210SAS>show>filter#
Output Show Filter Counters — The following table describes the output fields when the counterskeyword
is specified.
7210 SAS M, T, X, R6, R12, Mxp OS Router Configuration Guide
: 1
: Template
: 2
: (Not Specified)
: 1
- SAP 1/1/1:1 (Ingress)
: 2
- SAP 1/1/1:2 (Ingress)
- SAP 1/1/1:3 (Ingress)
Label
Filter Id
Scope
Entries
Applied
Def. Action
Description
Entry

Table 20: Show Filter Counters

The IPv6 filter policy ID.
Template — The filter policy is of type Template.
Exclusive — The filter policy is of type Exclusive.
The number of entries configured in this filter ID.
No — The filter policy ID has not been applied.
Yes — The filter policy ID is applied.
Forward — The default action for the filter ID for packets that do
not match the filter entries is to forward.
Drop — The default action for the filter ID for packets that do
not match the filter entries is to drop.
The IP filter policy description.
The filter ID filter entry ID. If the filter entry ID indicates the
entry is (Inactive), then the filter entry is incomplete as no action
has been specified.
Filter Policies
Applied : Yes
Def. Action : Drop
Type : Epipe
Type : VPLS
Description
Page 327