Maintenance And Repair; Oil Level Check And Change - SSANGYONG Kyron Repair Manual

MAINTENANCE AND REPAIR

1. OIL LEVEL CHECK AND CHANGE

Oil Level Check
1. Clean the oil level plug (filler plug) and surroundings.
2. Remove the oil level plug an check whether oil is spilled
out.
3. Add oil if necessary. Tighten the oil level plug.
Installation Notice
Tightening torque
Oil Change
1. Clean the oil level plug, drain plug and surroundings.
2. Place a proper container under the transfer case.
3. Remove the drain plug and then remove the oil level plug
(filler plug).
4. Drain the oil and tighten the drain plug.
5. Fill the oil through the oil level plug until oil begins to
drip out.
Installation Notice
Tightening torque
Cautions for Oil Level Check and Plugs
1. Be careful of hot oil when draining.
2. Do not use an impact wrench to remove or tighten the
oil level plug or drain plug since this will damage the
threads in the plug.
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
19 ~ 30 Nm
Drain plug
19 ~ 30 Nm
Drain plug
PART TIME TRANSFER CASE & LOCKING HUB SYSTEM
25
3240
Oil level plug
Oil level plug
KYRON SM - 2005.09