Disassembly And Reassembly Propeller Shaft - SSANGYONG KYRON 2010.01 Manual

DISASSEMBLY AND REASSEMBLY
3310-00
PROPELLER SHAFT
1) Disassembly
1. Place an alignment mark and remove the
propeller shaft.
2. Place an alignment on the spiders before
removing.
3. Remove the snap ring with snap ring pliers.
4. Tap the yoke shoulder on shaft with
copper hammer to remove the roller
bearing. Remove the other bearings with
same manner.
5. If it cannot be removed, hold the welding
area with vise and remove the needle
bearing by using a suitable drift and
hammer.
11-11
3310-00
PROPELLER SHAFT
KYRON 2010.01