Show Interfaces Phy - Dell C9000 Series Reference Manual

Time since last suppressed
Time remaining to change state to up : 0
Related
Commands

show interfaces phy

Display auto-negotiation and link partner information.
C9000 Series
Syntax
show interfaces gigabitethernet slot/port phy
Parameters
gigabitethernet
tengigabitethernet Enter the keyword tengigabitethernet then the slot or port
Command Modes
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.1.1.0
7.6.1.0
6.5.4.0
• dampening — configures dampening on an interface.
• show interfaces — displays information on a specific physical interface or virtual
interface.
• show interfaces configured
configuration.
Enter the keyword gigabitethernet then the slot/port
information.
information.
• EXEC
• EXEC Privilege
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the C-Series and S-Series.
Introduced on the E-Series.
: 0
— displays any interface with a non-default
Interfaces 982