Version
8.3.7.0
8.5.1.0
8.1.1.0
7.6.1.0
7.5.1.0
7.4.1.0
Example
Dell#show interfaces dampening
Interface Supp
Te 3/2
Te 3/10
Dell#
Related
dampening
Commands
show interfaces
interface.
show interfaces configured
configuration.
show interfaces phy
Display auto-negotiation and link partner information.
Z9500
Syntax
show interfaces {tengigabitethernet | fortyGigE} slot/port phy
Parameters
{tengigabitethe
rnet |
fortyGigE}
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
Interfaces
Description
Introduced on the S4810.
Added support for 4-port 40G line cards on ExaScale.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced
Flaps Penalty Half-Life Reuse Suppress Max-Sup
State
Up
0
Up
0
— configures dampening on an interface.
— displays information on a specific physical interface or virtual
Enter one of the keywords tengigabitethernet or
fortyGigE with slot/port information.
EXEC
EXEC Privilege
Description
Introduced on the Z9500.
0
20
0
5
— displays any interface with a non-default
800
4500
120
750
2500
20
845