Clear Counters Ip Access-Group; Ip Access-Group - Dell Z9500 Reference Manual

NOTE: Also refer to the

clear counters ip access-group

Erase all counters maintained for access lists.
Z9500
Syntax
clear counters ip access-group [access-list-name]
Parameters
access-list-
name
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.1.1.0
7.8.1.0
7.6.1.0
7.5.1.0
6.2.1.1

ip access-group

Assign an IP access list (IP ACL) to an interface.
Z9500
Syntax
ip access-group access-list-name {in | out} [implicit-permit]
[vlan vlan-id]
To delete an IP access-group configuration, use the no ip access-group
access-list-name {in | out} [implicit-permit] [vlan vlan-id]
command.
206
Commands Common to all ACL Types
(OPTIONAL) Enter the name of a configured access-list, up
to 140 characters.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Increase the name string to accept up to 140 characters.
Prior to 7.8.1.0, names were up to 16 characters long.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
section.
Access Control Lists (ACL)