Ipv6 Bgp Neighbor Activate-Ipv6 - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

ipv6 bgp neighbor activate-ipv6

Enables the exchange of IPv6 unicast routes between BGP peer routers identified by their IPv6 addresses.
ipv6 bgp neighbor ipv6_address [activate-ipv6]
no ipv6 bgp neighbor ipv6_address [activate-ipv6]
Syntax Definitions
ipv6_address
Defaults
This command is disabled by default.
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
Use the no form of this command to disable the exchange of IPv6 unicast routes between BGP peer rout-
ers identified by their IPv6 addresses.
Examples
-> ipv6 bgp neighbor 1.0.0.1 activate-ipv6
-> no ipv6 bgp neighbor 1.0.0.1 activate-ipv6
Release History
Release 6.1.5; command was introduced.
Related Commands
show ipv6 bgp neighbors
MIB Objects
alaBgpPeer6Table
alaBgpPeer6Addr
alaBgpPeer6ActivateIpv6
page 25-222
The 128-bit IPv6 address.
Displays the configured IPv6 BGP peers.
OmniSwitch CLI Reference Guide
BGP Commands
June 2012