Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 1935

IP Multicast VLAN Commands
•
The recommended maximum number of addresses to be specified in a range is 256. Larger ranges
should be broken up into separate commands. Continguous address ranges entered with separate
commands are treated as a single range and should be broken up using the prefixlen or mask parame-
ters.
•
IPv4 multicast group address with longest Prefix Length association takes preference over other IPv4
multicast group address.
•
Non-zero host bits are not allowed for the creation of IPv4 addresses with mask/prefix-length. E.g.
225.1.3.4/24 is not allowed; the correct group/mask should be 225.1.3.0/24.
•
Optional parameters Prefixlen and mask are not supported in OS9000E.
Examples
-> vlan ipmvlan 1003 address 225.0.0.1
-> vlan ipmvlan 1033 address ff08::3
-> vlan ipmvlan 1033 address 226.0.1.0/24
-> vlan ipmvlan 1033 address 226.0.1.0 mask 255.255.255.0
-> vlan ipmvlan 1033 address 224.1.1.7-224.1.1.9
-> vlan ipmvlan 1033 address ffae::7-ffae::9
-> no vlan ipmvlan 1003 address 225.0.0.1
-> no vlan ipmvlan 1033 address ff08::3
-> no vlan ipmvlan 1033 address 226.0.1.0/24
-> no vlan ipmvlan 1033 address 226.0.1.0 mask 255.255.255.0
-> no vlan ipmvlan 1033 address 224.1.1.7-224.1.1.9
-> no vlan ipmvlan 1033 address ffae::7-ffae::9
Release History
Release 6.2.1; command was introduced.
Release 6.3.4; ability to assign the same multicast address to different IPMVLANs was added.
Release 6.4.2; Prefixlen and mask parameters added.
Related Commands
show vlan ipmvlan address
MIB Objects
alaipmvVlanIpAddrMaskTable
alaipmvVlanIpAddrVlanNumber
alaipmvVlanIpAddrType
alaipmvVlanIpAddress
alaipmvVlanIpAddrMaskEntry
alaipmvVlanIpAddrRowStatus
OmniSwitch CLI Reference Guide
Displays the IPv4 and IPv6 addresses assigned to single IP Multicast
VLAN or all the configured IP Multicast VLANs.
June 2012 page 28-7