Ip Slb Probe Status - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

Server Load Balancing Commands

ip slb probe status

Configures the expected status returned from an HTTP GET to verify the health of a server.
ip slb probe probe_name {http | https} status status_value
Syntax Definitions
probe_name
http
https
status_value
Defaults
parameter
status_value
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 9000E
Usage Guidelines
N/A
Examples
-> ip slb probe web_server http status 404
Release History
Release 6.1; command was introduced.
Related Commands
ip slb probe
show ip slb probes
MIB Objects
slbProbeTable
slbProbeName
slbProbeMethod
slbProbePeriod
slbProbeHttpStatus
OmniSwitch CLI Reference Guide
Specifies the name of the Server Load Balancing (SLB) probe.
Specifies an HTTP probe.
Specifies an HTTPS probe.
Specifies the expected status returned, which can be 0–4294967295.
default
200
Configures and deletes SLB probes.
Displays the configuration of SLB probes.
June 2012 page 26-29