Show Ipv6 Pim Static-Rp - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show ipv6 pim static-rp

Displays the IPv6 PIM Static RP table, which includes IPv6 multicast group address/prefix length, the
static Rendezvous Point (RP) address, and the current status of the static RP configuration (i.e., enabled or
disabled).
show ipv6 pim static-rp
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
If the group prefixes configured for two or more rows in this table overlap, the row with the greatest prefix
length value is used for the overlapping range.
Examples
-> show ipv6 pim static-rp
Group Address/Pref Length
---------------------------+-------------+-----+--------+----------+--------
ff00::/8
ff34::/32
output definitions
Group Address/Pref Length
RP Address
Mode
Override
Precedence
Status
Release History
Release 6.3.1; command was introduced.
page 30-108
RP Address Mode
3000::11 asm
3000::11 asm
The IPv6 multicast group address along with the prefix length.
The IPv6 address of the RP that is mapped for the groups within the
group prefix. This field is set to zero, if the specified IPv6 PIM mode is
SSM or DM.
The IPv6 PIM mode that is used for the groups in this prefix. The possi-
ble values include ASM, SSM, or DM.
Specifies that this static RP configuration can override the dynamically
learned RP information for the specified group(s).
The precedence value that is used for this static RP configuration.
Displays whether the static RP configuration is currently enabled or
disabled. Options include enabled and disabled.
Override Precedence Status
false none
false none
OmniSwitch CLI Reference Guide
PIM Commands
enabled
enabled
June 2012