Ipv6 Ospf Area - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

OSPFv3 Commands

ipv6 ospf area

Assigns an OSPFv3 interface to a specified area.
ipv6 ospf area area_id [type {normal | stub [default-metric metric]}]
no ipv6 ospf area area_id
Syntax Definitions
area_id
normal
stub
metric
Defaults
parameter
normal | stub
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
•
Use the no form of the command to delete the OSPFv3 area.
•
The default-metric parameter defines the metric to be used for default routes injected into the stub
area.
Examples
-> ipv6 ospf area 0.0.0.1
-> ipv6 ospf area 0.0.0.1 stub
-> ipv6 ospf area 0.0.0.1 type normal
-> no ipv6 ospf area 0.0.0.1
Release History
Release 6.1.3; command was introduced.
Related Commands
show ipv6 ospf area
OmniSwitch CLI Reference Guide
A unique 32-bit value in IPv4 address format.
Sets the area as a regular OSPFv3 area.
Configures an OSPFv3 area as a stub area.
Defines the metric to be used for default routes injected into the stub.
default
normal
Displays either all the OSPFv6 areas, or a specified OSPFv6 area.
June 2012 page 23-13