Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 1691

BGP Commands
output definitions (continued)
Last DOWN reason
# of msgs rcvd
# of Update msgs rcvd
# of prefixes rcvd
# of Route Refresh msgs rcvd
# of Notification msgs rcvd
OmniSwitch CLI Reference Guide
Provides a message as the last reason why a peer went down. The pos-
sible reasons for going down are:
user_request - user initiated
conn_timeout - connection timer expired
hold_timeout - hold timer expired
bad_msg - received a bad message from neighbor
fsm_blink - BGP FSM error
peer_closed - neighbor closed connection
peer_notify - neighbor sent fatal notification
tcp_error - Fatal TCP error
none - None
Total number of messages (UPDATE, NOTIFY, OPEN, KEEPALIVE)
received from this peer.
The number of route UPDATE messages received from this peer.
UPDATE messages contain route reachability information, BGP
attributes, and route feasibility information.
The number of unique route prefixes received by this peer.
The number of route refresh requests this peer has received. Route
refresh requests all routes learned be a peer.
The number of NOTIFY messages received from this peer. NOTIFY
messages contain error information, such as unsupported parameters,
invalid attributes, and holdtime expirations.
June 2012 page 25-179