Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 1471

IS-IS Commands
Spf Trigger Reason
SpfTimeStamp
spfRunTime
Spf Involved L1 Nodes :
Spf Involved L2 Nodes :
Spf Event-count
Last TriggeredLspId
Spf Trigger Reason
----------------------------------------------------------------------------
Log Entries : 2
============================================================================
output definitions
SpfTimeStamp
spfRunTime
Spf Involved L1 Nodes
Spf Involved L1 Nodes
Spf Event-count
Last TriggeredLspId
Spf trigger Reason
Log Entries
Release History
Release 6.2.1; command was introduced.
Related Commands
show ip isis spf
clear ip isis spf-log
MIB Objects
vRtrIsisSpfLogTable
vRtrIsisSpfRunTime
vRtrIsisSpfL1Nodes
VRtrIsisSpfL2Nodes
vRtrIsisSpfEventCount
vRtrIsisSpfLastTriggerLSPId
vRtrIsisSpfTriggerReason
OmniSwitch CLI Reference Guide
: newAdjacency(0) ,lspExpired(8) ,lspChanged(10)
: SUN OCT 01 05:15:46 2006
: 0
72
72
: 227
: 0020.0200.2001.00-4a
: newAdjacency(0) ,lspExpired(8) ,lspChanged(10)
The timestamp when the SPF run started on the system.
The time (in hundredths of a second) required to complete the SPF run.
The number of Level-1 nodes involved in the SPF calculation.
The number of Level-2 nodes involved in the SPF calculation.
The number of SPF events that triggered the SPF calculation.
The LSP ID of the last LSP processed before the SPF run.
Indicates the reasons (newAdjacency, lspExpired, or lspChanged) for
SPF calculations.
The number of SPF logs.
Displays the IS-IS SPF calculation information.
Clears and resets the IS-IS SPF log information.
June 2012 page 24-49