Ip Bgp Neighbor Clear Soft - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

ip bgp neighbor clear soft

Invokes an inbound or outbound policy reconfiguration for a BGP peer.
ip bgp neighbor ip_address clear soft {in | out}
Syntax Definitions
ip_address
in
out
Defaults
N/A
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
•
This command reconfigures (or reapplies) all inbound or outbound policies to existing routes without
restarting the peer session.
•
This command is useful if policies have been changed.
Examples
-> ip bgp neighbor 172.22.2.115 clear soft in
-> ip bgp neighbor 172.22.2.115 clear soft out
Release History
Release 6.1; command was introduced.
Related Commands
ip bgp neighbor soft-
reconfiguration
MIB Objects
alaBgpPeerTable
alaBgpPeerReconfigureInBound
alaBgpPeerReconfigureOutBound
page 25-96
32-bit IP address for the BGP peer.
Applies reconfiguration to the inbound policies.
Applies reconfiguration to the outbound policies.
Enables or disables BGP peer soft reconfiguration.
OmniSwitch CLI Reference Guide
BGP Commands
June 2012