IS-IS Commands
ip isis csnp-auth
Enables or disables the authentication of Complete Sequence Number PDUs (CSNPs).
ip isis csnp-auth
no ip isis csnp-auth
Syntax Definitions
N/A
Defaults
CSNP authentication check is enabled by default.
Platforms Supported
OmniSwitch 6850, 6850E, 9000E
Usage Guidelines
Use the no form of this command to prevent the CSNP authentication.
Examples
-> ip isis csnp-auth
-> no ip isis csnp-auth
Release History
Release 6.2.1; command was introduced.
Related Commands
ip isis level csnp-auth
show ip isis status
MIB Objects
vRtrIsisTable
vRtrIsisCsnpAuthentication
OmniSwitch CLI Reference Guide
Configures CSNP authentication for specific IS-IS levels.
Displays the IS-IS status.
June 2012
page 24-11