Vlan Ipmvlan Ctag - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

vlan ipmvlan ctag

Defines the mapping between an IPMVLAN and a customer VLAN ID (c-tag) to be used in the c-tag
translation rule.
vlan ipmvlan ipmvlan-id ctag {ctag | ctag1-ctag2}
no vlan ipmvlan ipmvlan-id ctag {ctag | ctag1-ctag2}
Syntax Definitions
ipmvlan-id
ctag
ctag1-ctag2
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6855, 6850E, 9000E
Usage Guidelines
•
Use the no form of this command to remove the mapping between the IPMVLAN and the customer
VLAN ID.
•
If the c-tag is already assigned to another IPMVLAN, the configuration request will fail.
•
If you assign a range of c-tags to an IPMVLAN, an error message will be displayed for the c-tags
already assigned to the IPMVLAN.
•
The command will not work in Enterprise Mode.
Examples
-> vlan ipmvlan 1003 ctag 10
-> no vlan ipmvlan 1003 ctag 10
Release History
Release 6.2.1; command was introduced.
page 28-4
Specifies the IP Multicast VLAN number for which the c-tag is to be
assigned.The valid range is 2–4094.
The customer VLAN ID number is used in the translation rule. The
valid range is 1–4094.
Specifies the range of the customer VLAN ID numbers.
IP Multicast VLAN Commands
OmniSwitch CLI Reference Guide June 2012