Ipv6 Pim Spt Status - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

ipv6 pim spt status

Enables or disables last hop Designated Router (DR) switching to the Shortest Path Tree (SPT).
ipv6 pim spt status {enable | disable}
Syntax Definitions
enable
disable
Defaults
parameter
enable | disable
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
•
This command is supported only in the sparse mode.
•
If the SPT status is enabled, last hop DR switching to the SPT begins once the first data packet is
received.
Examples
-> ipv6 pim spt status enable
-> ipv6 pim spt status disable
Release History
Release 6.3.1; command was introduced.
Related Commands
show ipv6 pim sparse
MIB Objects
alaPimsmGlobalConfig
alaPimsmV6SPTConfig
page 30-88
Enables last hop DR switching to the SPT.
Disables last hop DR switching to the SPT.
default
enable
Displays the status of the various global parameters for the IPv6
PIM sparse mode.
OmniSwitch CLI Reference Guide
PIM Commands
June 2012