Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 1937

IP Multicast VLAN Commands
-> ethernet-service svlan 1001
-> ethernet-service svlan 1001 nni 1/49
-> ethernet-servicee ipmvlan 1033
-> vlan ipmvlan 1033 sender-port port 1/49
Note that in the above example, port 1/49 was first configured as a VLAN Stacking network (NNI) port
before it was configured as a sendor port for the IPMVLAN. See the "VLAN Stacking Commands" chap-
ter for more information.
The following command removes the port configured as sender port:
-> no vlan ipmvlan 1003 sender-port port 1/50
Release History
Release 6.2.1; command was introduced.
Release 6.3.1; support added for entering a range and/or multiple entries of ports and aggregates.
Related Commands
show vlan ipmvlan port-config
MIB Objects
alaipmvVlanPortTable
alaipmvVlanPortIPMVlanNumber
alaipmvVlanPortPortNumber
alaipmvVlanPortPortType
alaipmvVlanPortRowStatus
OmniSwitch CLI Reference Guide
Displays the sender and receiver ports for a specific IP Multicast VLAN
or all the IP Multicast VLANs.
June 2012 page 28-9