Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 1673

BGP Commands
output definitions (continued)
Path atomic
Path AS aggregator
Path IPaddr aggregator
Path community
Path unknown attribute
Release History
Release 6.1; command was introduced.
Related Commands
show ip bgp routes
MIB Objects
alaBgpPathTable
alaBgpPathEntry
OmniSwitch CLI Reference Guide
Indicates whether the ATOMIC-AGGREGATE attribute has been set
for this route. When set (this field would read yes), this attribute indi-
cates that an aggregate has caused a loss of information for this route
(a less specific route was chosen over a more specific route included in
the aggregate).
Part of the AGGREGATOR attribute. This field indicates the AS for
the BGP speaker that created the aggregate. A value of <none> indi-
cates this is not an aggregate route.
Part of the AGGREGATOR attribute. This field indicates the IP
address for the BGP speaker that created the aggregate. A value of
<none> indicates that this is not an aggregate route.
Indicates the community to which this route path belongs, if applica-
ble. A value of <none> indicates that this route does not belong to a
community.
Indicates BGP attributes found in UPDATE messages which the router
does not support. For example, multi-protocol attributes are currently
not supported by the router, but it is possible for these attributes to
appear in a BGP route.
Displays BGP route details.
June 2012 page 25-161