Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 1460

output definitions
LSP ID
Sequence
Checksum
Lifetime
Attributes
LSP Count
show isis database detail
Legends : P
OV
ATT
L1
L2
==================================================================
ISIS Database
==================================================================
Displaying level-1 database
------------------------------------------------------------------
LSP ID : 1720.2116.0051.00-00
Sequence : 0x44
Version : 1
Attributes : L1L2
SysID Len : 6
TLVs :
Area Addresses
Area Address
Supp protocols
Protocols
IS-Hostname
Hostname
IS Neighbors
Virtual Flag
Neighbor
IPv4 I/F Address
IP Address
IP Address
IPv4 Internal Reach :
IP Prefix
IP Prefix
IPv4 External Reach :
IP Prefix
IP Prefix
level-1 LSP count : 1
Displaying level-2 database
------------------------------------------------------------------
page 24-38
The LSP ID. Indicates the system ID and the pseudo-node ID of the
originating router.
The sequence number of the LSP. The sequence number is a value used
to identify old and duplicate LSPs.
The checksum value of the LSP.
The number of seconds the LSP remains valid. The LSP lifetime value
of zero indicates that this LSP is being removed from the Link State
Database of all the routers.
The level capability of the router.
The number of LSPs in the Link State Database.
= The Partition repair bit is set
= The overload bit is set
= The Attach bit is set
= Specifies a Level 1 IS type
= Specifies a Level 2 IS type
Checksum : 0xb664
Pkt Type : 18
Max Area : 3
Used Len : 635
:
: (3) 49.0000
:
: Ipv4 , Ipv6
:
: kite-53
:
: 0
: 1720.2116.0052.00
:
: 172.21.160.51
: 172.21.160.52
: 16.16.16.0/24 (Dir.: UP )
: 17.17.17.0/24 (Dir.: UP )
: 24.24.24.0/24 (Dir.: UP )
: 25.25.25.0/24 (Dir.: UP )
Level : L1
Lifetime : 818
Pkt Ver : 1
Alloc Len : 1489
Metric : 10 (I)
Metric : 10 (I)
Metric : 10 (I)
Metric : 10 (E)
Metric : 10 (E)
OmniSwitch CLI Reference Guide
IS-IS Commands
June 2012