IS-IS Commands
ip isis status
Enables or disables the administrative status of IS-IS on the switch.
ip isis status {enable | disable}
Syntax Definitions
enable
disable
Defaults
parameter
enable | disable
Platforms Supported
OmniSwitch 6850, 6850E, 9000E
Usage Guidelines
When IS-IS status is disabled, the configuration settings and related statistics of the protocol remain unaf-
fected.
Examples
-> ip isis status enable
-> ip isis status disable
Release History
Release 6.2.1; command was introduced.
Related Commands
show ip isis status
MIB Objects
isisSysTable
isisSysAdminState
OmniSwitch CLI Reference Guide
Enables IS-IS.
Disables IS-IS.
default
disable
Displays the IS-IS status.
June 2012
page 24-5