Qos Quarantine Mac-Group - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

Alcatel-lucent omniswitch 6850-48: reference guide

Hide thumbs Also See for OmniSwitch 6850-48:

Table of Contents

qos quarantine mac-group

Configures the name of the Quarantine MAC address group. The OmniVista Quarantine Manager applica-

tion identifies source MAC addresses to quarantine and adds these addresses to the Quarantine MAC

qos quarantine mac-group mac_group

qos no quarantine mac-group

Syntax Definitions

Platforms Supported

OmniSwitch 6400, 6850, 6850E, 6855

Usage Guidelines

Use the no form of the command to reset the default MAC group name back to "Quarantined".

The mac-group name specified with this command must match the group name specified with the

OmniVista Quarantine Manager application.

Each switch can have a different Quarantine MAC group name as long as each switch matches the

OmniVista Quarantine Manager MAC group name for that switch. Note that there is only one such

MAC group per switch.

Do not use the Quarantine MAC group name in regular QoS policies.

This group is also used by the switch Quarantine Manager and Remediation (QMR) application to

restrict or restore network access to quarantined MACs.

Note that QMR is not available if VLAN Stacking services or QoS VLAN Stacking inner VLAN and

802.1p policies are configured on the switch.

QMR is considered active when there are MAC addresses in the Quarantine MAC address group. Use

show policy mac group

address-table

command output display identifies quarantined MAC addresses.

-> qos quarantine mac-group mac_group1

-> no quarantine mac-group

The name of the Quarantine MAC group (up to 31 alphanumeric charac-

command to display the contents of this group. In addition, the

OmniSwitch CLI Reference Guide

QoS Commands