PIM Commands
ip load pim
Dynamically loads PIM to memory.
ip load pim
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
•
This command must be executed before PIM can run on the switch.
•
This command is supported in both IPv4 and IPv6 PIM.
•
The advanced routing image must be loaded to flash before the feature will start to work on the switch.
Examples
-> ip load pim
Release History
Release 6.1.1; command was introduced.
OmniSwitch CLI Reference Guide
June 2012
page 30-3