show ipv6 ospf host
Displays information on the configured OSPFv3 hosts.
show ipv6 ospf host [ipv6_address]
Syntax Definitions
ipv6_address
Defaults
N/A
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
•
This command is used to display general information for OSPFv3 hosts directly attached to this router.
•
See the Related Commands section below to modify the list.
Examples
-> show ipv6 ospf host
Area
---------------+-------+-----------
0.0.0.1
output definitions
Area
Metric
Address
Release History
Release 6.1.3; command was introduced.
page 23-30
A 128-bit IP address for a directly attached host.
Metric
Address
1
2001::1/64
A 32-bit IP address for a directly attached host. This can be set using
the
ipv6 ospf host
The metric assigned to the host. Metric is set using the
command.
IPV6 address of the host.
command.
OmniSwitch CLI Reference Guide
OSPFv3 Commands
ipv6 ospf host
June 2012