Ipv6 Ospf Interface Priority - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

ipv6 ospf interface priority

Configures the OSPFv3 interface priority. The priority number helps determine the eligibility of this router
to become the designated router on the network.
ip ospf interface interface_name priority priority
Syntax Definitions
interface_name
priority
Defaults
parameter
priority
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
When two routers attached to a network both attempt to become the designated router, the one with the
highest priority becomes the designated router. A router whose router priority is set to 0 is ineligible to
become the designated router.
Examples
-> ipv6 ospf interface vlan-101 priority 100
Release History
Release 6.1.3; command was introduced.
Related Commands
show ipv6 ospf interface
MIB Objects
ospfv3IfTable
ospfv3IfIndex
ospfv3IfRtrPriority
page 23-22
The name of the interface.
The interface priority. The valid range is 0–255.
default
1
Displays the status and statistics of an OSPFv3 interface.
OmniSwitch CLI Reference Guide
OSPFv3 Commands
June 2012