Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 1477

IS-IS Commands
output definitions (continued)
L1 Psnp-Auth Check
L2 Hello-Auth Check
L2 Csnp-Auth Check
L2 Psnp-Auth Check
Area Address
Release History
Release 6.2.1; command was introduced.
Release 6.3.1; Adjacency Check field was added.
Related Commands
ip isis status
ip isis level-capability
ip isis auth-type
ip isis csnp-auth
ip isis hello-auth
ip isis psnp-auth
ip isis graceful-restart
ip isis overload
ip isis overload-on-boot
ip isis lsp-wait
ip isis spf-wait
ip isis level auth-type
ip isis level hello-auth
ip isis level csnp-auth
ip isis level psnp-auth
ip isis level wide-metrics-only
ip isis area-id
ip isis auth-check
OmniSwitch CLI Reference Guide
Indicates the status of L1 PSNP authentication check (Enabled or Dis-
abled).
Indicates the status of L2 Hello authentication check (Enabled or Dis-
abled).
Indicates the status of L2 CSNP authentication check (Enabled or Dis-
abled).
Indicates the status of L2 PSNP authentication check (Enabled or Dis-
abled).
The area address of the router.
Enables or disables the administration status of IS-IS on the router.
Configures the router level of the IS-IS protocol globally.
Configures authentication type of IS-IS protocol globally.
Enables or disables the authentication of CSNPs.
Enables or disables the authentication of Hello PDUs globally.
Enables or disables the authentication of PSNPs.
Configures graceful restart on the router.
Sets the IS-IS router to operate in the overload state for a specified time
period.
Configures the IS-IS router to be in the overload state after bootup for a
specified time period.
Configures the time interval between successively generated LSPs.
Configures the time interval between successive Shortest Path First
(SPF) calculations.
Enables the authentication and configures the authentication types for
specific IS-IS levels.
Enables or disables the authentication of Hello PDUs for specific IS-IS
levels.
Enables or disables the authentication of CSNPs for specific IS-IS lev-
els.
Enables or disables the authentication of PSNP PDUs for specific IS-IS
levels.
Configures wide metrics in LSPs for specific IS-IS levels.
Configures the area ID for the switch.
Enables or disables authentication check for IS-IS PDUs.
June 2012 page 24-55