Ip Bgp Neighbor Status - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

BGP Commands

ip bgp neighbor status

Enables or disables a BGP peer.
ip bgp neighbor ip_address status {enable | disable}
Syntax Definitions
ip_address
enable
disable
Defaults
parameter
enable | disable
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
•
You must first create a peer and assign it an IP address using the
enabling the peer.
•
Configure all BGP peer related commands before enabling a peer using this command. Once you
enable the peer it will begin sending BGP connection and route advertisement messages.
Examples
-> ip bgp neighbor 172.22.2.115 status enable
-> ip bgp neighbor 172.22.2.115 status disable
Release History
Release 6.1; command was introduced.
Related Commands
ip bgp neighbor
show ip bgp neighbors
MIB Objects
alaBgpPeerTable
alaBgpPeerAddr
OmniSwitch CLI Reference Guide
32-bit IP address of the new BGP peer.
Enables this peer.
Disables this peer.
default
disable
Creates a BGP peer.
Displays peer parameters.
June 2012
ip bgp neighbor command before
page 25-55