Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 1913

IP Multicast Switching Commands
Related Commands
ipv6 multicast status
ipv6 multicast version
ipv6 multicast query-interval
ipv6 multicast last-member-
query-interval
ipv6 multicast query-response-
interval
ipv6 multicast unsolicited-
report-interval
ipv6 multicast router-timeout
ipv6 multicast source-timeout
ipv6 multicast querying
ipv6 multicast robustness
ipv6 multicast spoofing
ipv6 multicast zapping
ipv6 multicast proxying
MIB Objects
alaMld
alaMldStatus
alaMldQuerying
alaMldProxying
alaMldSpoofing
alaMldZapping
alaMldQuerierForwarding
alaMldVersion
alaMldRobustness
alaMldQueryInterval
alaMldQueryResponseInterval
alaMldLastMemberQueryInterval
alaMldUnsolicitedReportInterval
alaMldRouterTimeout
alaMldSourceTimeout
alaMldHelperInterfaceIndex
alaMldVlan
alaMldVlanStatus
alaMldVlanQuerying
OmniSwitch CLI Reference Guide
Enables or disables IPv6 Multicast Switching and Routing on the speci-
fied VLAN or on the system if no VLAN is specified.
Sets the default version of the MLD protocol on the specified VLAN or
on the system if no VLAN is specified.
Sets the MLD query interval on the specified VLAN or on the system if
no VLAN is specified.
Sets the MLD last member query interval on the specified VLAN or on
the system if no VLAN is specified.
Sets the MLD query response interval on the specified VLAN or on the
system if no VLAN is specified.
Sets the MLD unsolicited report interval on the specified VLAN or on
the system if no VLAN is specified.
Configures the expiry time of IPv6 multicast routers on the specified
VLAN or on the system if no VLAN is specified.
Configures the expiry time of IPv6 multicast sources on the specified
VLAN or on the system if no VLAN is specified.
Enables or disables MLD querying on the specified VLAN or on the
system if no VLAN is specified.
Sets the MLD robustness variable on the specified VLAN or on the sys-
tem if no VLAN is specified.
Enables or disables MLD spoofing on the specified VLAN or on the
system if no VLAN is specified.
Enables or disables MLD zapping on the specified VLAN or on the sys-
tem if no VLAN is specified.
Enables or disables MLD proxying on the specified VLAN or on the
system if no VLAN is specified.
June 2012 page 27-107