Qos Default Routed Disposition - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

qos default routed disposition

Configures the default disposition for routed traffic (Layer 3) that comes into the switch and does not
match any policies.
qos default routed disposition {accept | deny | drop}
Syntax Definitions
accept
drop
deny
Defaults
By default, the disposition for flows that do match any policies is accept.
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
The disposition for particular flows may be configured through the policy action disposition
command. The disposition for a particular flow will override the global setting.
•
Typically, when configuring IP filtering rules, the global default disposition should be set to deny.
Filtering rules may then be configured to allow particular types of traffic through the switch.
Examples
-> qos default routed disposition deny
Release History
Release 6.1; command was introduced.
Related Commands
policy action disposition
MIB Objects
alaQoSConfigTable
alaQoSConfigRoutedDefaultDisposition
alaQoSConfigAppliedRoutedDefaultDisposition
page 32-16
Specifies that the switch should accept the flow.
Specifies that the switch should silently drop the flow.
Specifies that the switch should drop the flow and issue an ICMP
message indicating the flow was dropped for administrative reasons.
Currently this option will provide the same result as drop; that is, the
flow is silently dropped.
Configures a disposition for a policy action.
OmniSwitch CLI Reference Guide
QoS Commands
June 2012