Ip Isis Interface Level Priority - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

ip isis interface level priority

Configures the IS-IS router interface priority for the designated router election on a multi-access network.
ip isis interface interface_name level [1 | 2] priority number
no ip isis interface interface_name level [1 | 2] priority
Syntax Definitions
interface_name
1
2
number
Defaults
parameter
number
Platforms Supported
OmniSwitch 6850, 6850E, 9000E
Usage Guidelines
•
Use the no form of this command to restore the default value.
•
The router with the highest priority is the preferred designated router.
•
The designated router sends LSPs to this network and also to the routers that are attached to it.
Examples
-> ip isis interface vlan-isis level 1 priority 4
-> ip isis interface vlan-isis level 2 priority 4
-> no ip isis interface vlan-isis level 1 priority
Release History
Release 6.2.1; command was introduced.
page 24-78
The name of the given IP interface.
Specifies the IS-IS level as Level-1.
Specifies the IS-IS level as Level-2.
The priority value of this interface at this level. The valid range is
0–127.
default
64
OmniSwitch CLI Reference Guide
IS-IS Commands
June 2012