Ip Pim Neighbor-Loss-Notification-Period - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

ip pim neighbor-loss-notification-period

Specifies the minimum time that must elapse between PIM neighbor loss notifications originated by the
router.
ip pim neighbor-loss-notification-period seconds
Syntax Definitions
seconds
Defaults
parameter
seconds
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
•
The maximum value of 65535 represents an infinite time. The PIM neighbor loss notifications are
never sent in case of infinite time.
•
This command is used with both IPv4 and IPv6 PIM.
Examples
-> ip pim neighbor-loss-notification-period 100
Release History
Release 6.3.1; command was introduced.
Related Commands
show ip pim notifications
MIB Objects
alaPim
alaPimNeighborLossNotificationPeriod
page 30-32
Specifies the time value that must elapse between neighbor loss notifica-
tions, in seconds (0–65535).
default
0
Displays the configuration of the configured notification periods as
well as information on the events triggering the notifications.
OmniSwitch CLI Reference Guide
PIM Commands
June 2012