Ip Bgp Unicast - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

ip bgp unicast

Enables or disables unicast IPv4 advertisements for the BGP routing process.
ip bgp unicast
no ip bgp unicast
Syntax Definitions
N/A
Defaults
By default, BGP IPv4 advertisements are enabled.
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
•
Use the no form of this command to turn off IPv4 unicast advertisements.
•
BGP should be disabled before enabling or disabling IPv4 unicast advertisements.
•
IPv4 unicast advertisements may be turned off on homogenous IPv6 networks that are not aware of
IPv4 routing. In such cases, the command, ip router router-id, must be used to explicitly configure the
32-bit unique router identifier.
Examples
-> ip bgp unicast
-> no ip bgp unicast
Release History
Release 6.1.5; command was introduced.
Related Commands
ipv6 bgp unicast
show ip bgp
ip router router-id
MIB Objects
alaBgpGlobal
alaBgpMultiProtocolIpv4
page 25-8
Enables or disables unicast IPv6 updates for the BGP routing process.
Displays the current global settings for the local BGP speaker.
Configures the router ID for the router.
OmniSwitch CLI Reference Guide
BGP Commands
June 2012